You may not understand what I do… but it is still awesome.

December, 2013

How to get a raspberry Pi to set up a wireless ad-hoc network, but only if it is not already connected

This tutorial post will show you how to get a raspberry pi to set up a wireless ad-hoc network, but only if it not already connected. The wireless hotspot will also Dynamically assign IP Addresses to clients that connect. Things that you should already have A Raspberry Pi + SD Card (already set up) A […]

How to control the onboard ACT LED in bash

This post will show you how to control the onboard ACT led on the raspberry pi. To start with, run the following command to allow you to use the led: sudo echo none > /sys/class/leds/led0/trigger The above will prevent the light from acting as a disk activity indicator (the default. You may need to run […]

, , ,